| Order
No. |
Item |
Price |
The
Aeromarine Predator 3.5 and 7.5/11 cc outboard tunnels
Our Tunnels are not only fast, stable and realistic, but
must be the easiest and most economical way to get on the water.
Simply install radio and fuel tank and bolt on an outboard and you
are ready to race! They are easy to build and tune (an ideal first
boat) and have all the usual Aeromarine features: |
#1214
 |
Preditor .21
(3.5cc) Outboard Tunnel (30”) |
$149.95 |
| #1214H |
Complete
Hardware Kit for the Preditor .21 Outboard - Details |
$95.95 |
| #214 |
Preditor
.21 Replacement Hatch |
$24.95 |
| #1216 |
Preditor .45/.67
(7.5/11cc) Outboard (32”) |
$179.95 |
| #1216H |
Complete
Hardware Kit for the Preditor .45/.67 Outboard - Details |
$95.95 |
| #216 |
Preditor .45/.67
(7.5/11cc) Replacement Hatch |
$29.95 |
 |
Sabre
Canard - L.O.A. 45" Beam: 24" For .90-1.0 Nitro or
23-35 Gas
Many have tried to properly design a model of the full size Canard
and have failed…Until now. Aeromarine has spent many hours in
developing the design that was sought after for its incredible
speed. There is no prettier sight than the Sabre in action. Front
sponson hovering down the straights and skiing sharply around a
tight turn (left or right).
If you’re looking for something different, try this
"hi-tech" design and watch others look on in amazement. |
|
| #1224 |
Sabre Canard
Hull, L.O.A. 45" Beam: 24" For .90-1.0 Nitro or 23-35 Gas |
$329.95 |
| #1224H250GC |
Complete
Hardware Kit for the Sabre Canard For Gas (45”) - Details |
$229.95 |
| #224 |
Sabre Canard
Replacement Hatch |
$24.95 |
Aeromarine
Hardware Kits
All of our Hardware Kits include the following -
Motor Mount*, Flex Cable, Rudder Assembly, Starting Belt*, Fuel & Water Lines, Fuel Tank, Fuel Filter, Prop, 4-40 Pushrods & Solder Links, Stuffing Box
Tube, Strut Assembly, Nose Piece, Reducer Bushings, Led Teflon Bearings, Thrust Washers, Drive Dog, Prop Nut, Water Outlet, Tuned Pipe Bracket, Motor Mount Backing Plates*, Pressure Fitting*,Turn fin, Trim Tabs, Fiberglass Radio Box, Pushrod Seals, Flex Coupling*, Cowl Locks, Aluminum Stock for Mounting Hatch, Radio Box Plug, Bulkhead fittings, Antenna Assembly, Antenna Mount, Servo Trays.
* denotes, “Not included in Gasoline Hardware Kits”
Please note some items may not be necessary for your type hull and will not be included. All Kits are custom to the hull and include all quality Aeromarine Hardware. |
 |
|
If you would like to order any of our products you may
place your order by phone
Monday thru Friday, 8 am to 5 pm
Eastern time. at: 302-628-3944
You may also contact us by e-mail at: aeromarine@erols.com
|
