When it comes to designing hardware, Aeromarine is backed by decades of racing experience. Every piece is manufactured and designed with some very important goals in mind....make it light, strong, efficient, make it functionally perfect and make it reasonably priced.
You won't find big, bulky, overdesigned and gimmicky products in our line. When you purchase Aeromarine Hardware, your guaranteed a competition proven design of the highest quality that has been refined over years of racing.
Order No. Item Price
Aeromarine Rudders
Our .21/.45 Machined Rudder is made of high ,strength aluminum and comes pre-sharpened. Billet Aluminum (not brittle casting) Transom mounted pivot block with blind holes for a small Footprint. Kick back protection and a positionable nylon control horn for straight pushrod runs (adjust the horn, not the rudder!). Large water pickup role for plenty of flow.    
#1300
 21/.45 Machined Rudder Asmb. STD $39.95
#1300A .21/.45 Replacem. Rudder blade only  $18.95
#1300B Replacement Transom Pivot Block $9.99
#1300C Replacement .21/.45 Hinge Block $9.99
#1300D Replacemant .21 Hinge Pin $2.00
#1300E Replacement Teflon White Bushings $1.00pr.
#1300F Nylon Control Horn $.65
#1302 .21/.45 Machined Rudder Asmb.LNG. $42.95
#1302A .21/.45 Replacement Blade Long  $21.95
#1302B Replacement Transom Pivot Block $9.99
#1302C Replacement .21/.45 Hinge Block $9.99
#1302D Replacemant .21 Hinge Pin $2.00
#1302E Replacement Teflon White Bushings $1.00pr.
#1302F Nylon Control Horn $.65
.18/.66 Machined Rudder Assembly for Nitro or Electric powered boats. Finally a unique and High quality rudder at a reasonable price. Just the first in Aeromarines new line of machined hardware. Our new Posi-turn rudder with bronze bushings offer a positive, no bind, strong and lightweight answer to those flimsy stock setups on the new hydros and deep vees. 
  
#1301 .18/.65 Machined Posi-Turn Rudder Assembly for electric or nitro. $26.95
Rudder.jpg (217480 bytes) .45/1.0.Gas Rudder Assembly - This durable rudder provides kick back protection, adjustable control horn, strong aluminum angle brackets with brace and bronze bushed pivot block with oil hole for a frictionless and slop free rudder. Our properly designed Rudder provides plenty of water flow from an internal water pickup and plenty of surface area eliminating the need for redundant dual rudder setups.
#1304 .45/.90 Rudder Assembly Std.  $25.95
#1304A Replacement .45/.90 Std Blade only $9.95
#1304B Replacement Rudder Brackets only $3.95
#1304C Replacement .45/.90 Hinge Block  $7.95
#1304D Replacement Hinge Pin & Clip $2.50
#1304E Replacement Crimp Hinges $3.00pr.
#1304F Replacement Bronze Bushings $5.00pr.
#1306 .45/.90 Rudder Assembly Long Bld. $28.95
#1306A Replacement .45/.90 Long Blade $12.95
#1306B Replacement Rudder Brackets only $3.95
#1306C Replacement .45/.90 Hinge Block  $7.95
#1306D Replacement Hinge Pin & Clip $2.50
#1306E Replacement Crimp Hinges $3.00pr.
#1306F Replacement Bronze Bushings $5.00pr.

NEW.. Upgrade your Black Jack 55 and Shock Wave with BOLT ON performance!

Superior Turning capabilities in a matter of minutes!
Remove your old Rudder Blades and Upgrade your rudders to Aeromarines Performance Blades. This upgrade to your Black Jack or Shockwave will give you more stability in the turns and eliminates turbulent external Water pickup tubes and replaces them with internal water pickups....If your going to do only one upgrade.This should be it.
#1310 #1310 Black Jack/ Shock Wave Rudder Kit -
Includes Rudders and All hardware!!		 only $39.95!

Quantity:

NEW.. Turn that Black Jack 26 into a Royal Flush!


Aeromarine knows racing. We've taken a good hull, got rid of most of the problems and came up with a dependable racing machine! Remove the unnecessary turnfins that do not belong on a cat and cause drag with an offset rudder system! We've replaced the plastic outdrive with a stainless strut, a machined aluminum rudder, removed the cumbersome drain plug and replaced it with a self draining Autobailer. Threw out the weak universal joint and replaced it with our well known welded flex shaft and drive dog. What you have now is a good boat with replaceable parts, that you'll have hours of fun with!

#BJ26UP Black Jack 26 Conversion Hardware $89.95

Quantity:

#BJ26UP3PC Black Jack 26 - True spin 3 piece flex collet $16.95 A MUST!

Quantity:

Aeromarine Struts
In-Line Strut Rudder Assembly - Great for offshore classes or where equal turning is a must. Puts rudder edge 3 1/2" in front of the transom. All stainless mounting hardware included.
#1308 Stut/Rudder (in-line) Assembly $42.95
#1308A Replacement Strut/Rudder Brackets $9.95
Stainless Strut and Hardware - Great for .21/.45 Vee’s, Cats, Hydro’s! 2 1/2" high Stainless Blade, all hardware included. Comes complete with 3/16" led teflon bushings already installed.   
#1400
21_Strut1400.jpg (22884 bytes)		 21/.45 Stainless Strut Assm.w/ Leds $23.99
#1400A Replacement .21 Strut Brackets only $8.95
#1400B Replacement .21 Strut Blade w/leds $20.00
.18/.66 Machined Strut Assembly for Nitro or Electric powered boats with .187 (3/16") drives. Finally a unique and High quality strut at a reasonable price. Just the first in Aeromarines new line of machined hardware. Replace those sloppy "off the shelf" non adjustable, strut assemblies with our new machined, adjustable, streamlined, bronze bushed, True Turn strut assembly. A "no slop" vibration free upgrade sure to keep you running FAST and trouble free.
  
#1401 .18/.65 True Turn Strut 3/16 for electric or nitro. $22.95
Stainless Profiled Blade Strut - Our Standard strut includes all stainless mounting hardware, Profiled blade, perfectly counter bored to accept our nose piece and reducer bushings. Strong aircraft aluminum center braced brackets with provision for an auxiliary water pickup and/or tuned pipe mounting.
#1402 .45/.90 Strut Assembly 3-3/16” Blade $18.95
#1402A .45/.90 Strut Brackets only $8.95
#1402B Profiled Strut Blade only, 3-3/16” $9.50
#1404 .45/.90 Strut Assembly Lg. 3-11/16  $18.95
#1404A Profiled Strut Blade only, 3-11/16” $9.50
#1406 Hydro Strut Asem.(Thru Bott. hull) $17.95
#1407
gasstrut.jpg (88359 bytes)		 .45/.90 Strut Assm.w/Long Brackets $18.95
#1408 .45/.90 Strut Assm. .187 Complete - Details*  $23.99
#1410 .45/.90 Strut Assm. .250 Complete - Details*  $25.50
#1412 Hydro Strut Assm. .187 Complete - Details*  $22.95
#1414 Hydro Strut Assm. 250 Complete - Details*  $24.95
#1416 Non Profiled Strut Blade only, 3 3/16  $7.95
Stub Shafts, Ferrules and Prop Nuts
#1500
drivedog.jpg (14859 bytes)		 1/4" (.250) Drive Dog $2.50ea
#1501
nosepiece.jpg (17333 bytes)		 1/4" (.250) Nose Piece $1.99ea
#1502 1/4 (.250) Thrust Washers $1.95set
#1504
reducerbush.jpg (13372 bytes)		 1/4" (.250) Reducer Bushing $1.50ea.
#1506
ledteflons.jpg (4427 bytes)		 1/4" (.250) Lead Teflon Bearings $3.95pr.
#1507 3/16" Nose Piece $1.79
#1508 1/4 to 1/4 Solder Flex Ferrule $2.95
#1509
solderlessferrule.jpg (14523 bytes)		 1/4" to 1/4" Solderless Ferrule $4.95
#1510 3/16" (.187) Drive Dog $2.25ea
#1512 3/16" (.187) Thrust Washers $1.75set
#1516 3/16" (.187) Reducer Bushing $1.50ea.
#1517 3/16" (.187) Nose Piece $1.79pr.
#1518 3/16" (.187) Lead Teflon Bearings $2.95pr.
#1522 3/16” to 3/16”SolderFlex Ferrule $2.85
#1524 1/4” to 3/16”SolderFlex Ferrule $2.85
#1526  
PropNuts1526.jpg (22011 bytes)		 3/16” Prop Nuts (6 per Bag) $1.75
#1528   1/4” Prop Nuts (6 per Bag) $1.95
#1624 3/16” Stub Shaft (Hardened&Threaded) $4.00
#1626 1/4” Stub Shaft (Hardened&Threaded) $4.50
#1628 1/4”to 3/16” Stub Shaft $4.75
* Complete Assemblies include: Nose Piece, Reducer Bushing, Led Teflons, Blade, Brackets & All Mounting Hardware. Regular Assemblies do NOT include- Nose Piece, Reducer or Led Teflons. Please indicate if you are using a Square Drive setup.
Drive Hardware-
Turn Fins - Aeromarine offers a variety of turnfins for Vee’s, Mono’s and Hydro’s. Designed to avoid spin outs in hi-speed situations. All with kick back provisions. 
#7010 .21/.45 Stainless Turn Fin $8.95 
#7012
 .45/.90 Stainless Turn Fin $9.95 
#7014 .45/.60 Rigger Turn Fin $15.95
#7016
 .90/Gas Rigger,Lg. Hydro $15.95
Trim Tabs
#7000
Tab_Sngl7000.jpg (20384 bytes)		 Trim Tabs Single $9.95
#7001 Trim Tabs Single(lg.) $10.95
#7002   
Tab_Dbl7002.jpg (23172 bytes)		 Trim Tabs Double $18.95
Miscellaneous Hardware
#7004
CowlLock.jpg (22074 bytes)		 Cowl Locks $13.95 pr.
#7006
CowlLockBkt.jpg (23501 bytes)		 Cowl Lock Mounts $3.95 pr.
#7008
 Auto Bailers $5.95 ea.
#7018
auxwaterpu.jpg (12157 bytes)		 Adjustable Aux. Water Pick Up $14.95
#7020
transompickup.jpg (12801 bytes)		 Transom Mount Water Pick Up $7.95
#Sul562 4-40 Hvy Duty Ball Link  Retail - $2.95
Our Price - $2.35
#Sul526 4-40 Thd. Golden Clevis’ Retail - $1.45pr.
Our Price - $1.15pr.
Fittings
#2000
pressfittings.jpg (11797 bytes)		 Straight Water Fittings 10-32 $1.95pr.
#2002 
pressbigfittings.jpg (6387 bytes)		 Straight Water Fittings 1/4-32. $3.95pr
#2004   90 Deg. Water Fittings - 10-32 Thd. $4.95pr.
#2006
tfittings.jpg (17685 bytes)		 Tee Water Fittings - 10-32 Thd. $6.95 pr.
#2008   Stainless Steel Water Outlets $2.75ea.
#2010 Aluminum Water Outlets $1.95 ea.
#2011   Large Bore Alumin. Water Outlets $2.95 ea.
#2012
bulkheadfitssm.jpg (5262 bytes)		 Stainless Bulkhead Fitt. Std. Line $2.60 ea.
#2014
wateroutlet.jpg (20467 bytes)		 Aluminum Bulkhead Fitt. Large Line $2.90 ea.
#2016   10-32 Large Flow Banjo Fitting $4.95 ea.
#2018
 Blow Plug $4.95 ea.

If you would like to order any of our products you may place your order by phone
Monday thru Friday, 8 am to 5 pm Eastern time. at: 302-628-3944
You may also contact us by e-mail at: aeromarine@erols.com